Some CGM sensors can stay on during certain MRI or CT examinations, but many must be removed. The answer depends on the exact physical sensor, not the app name, the type of scan, and the product instructions that apply in India. Tell the radiology team which sensor you use before entering the scan area.
MRI uses a strong magnetic field and radiofrequency energy, whereas CT uses X-rays. MRI-conditional does not mean safe in every MRI scanner or for every examination. A CT exception for one CGM does not apply to another model. A CGM sensor, insulin pump, reader and phone are also different devices with separate safety restrictions.
CGM compatibility comparison for patients in India
The following eleven sensor systems or model groups are compared because Indian patients may encounter them in local practice or through imported products. This is not a top-ten ranking. Some manufacturer instructions are US-based; a listing or India-labelled manual does not by itself prove current Indian regulatory approval or stock availability.
What is different about newer FreeStyle Libre sensors?
Abbott's updated US FAQ says that FreeStyle Libre 2, 2 Plus, 3 and 3 Plus sensors do not require removal for X-ray or CT and may remain on during MRI under specified conditions. This does not include the older original Libre 14-day system or Libre Pro, which have removal instructions. In India, the original Libre sensor and Libre 2 Plus can look alike: Abbott India advises checking the carton for the model name.
Under Abbott's detailed US MRI conditions, these newer sensors may be scanned in a cylindrical 1.5T or 3T MRI system, using the required scanner configuration and normal operating mode. At 1.5T, scanning may continue for up to 60 minutes. At 3T, scanning between the pelvis and sternum is limited to 12 minutes followed by a 2-minute cooling interval; scanning other areas may continue for up to 60 minutes. These are manufacturer limits for the specified devices and scanner conditions, not instructions for patients to apply themselves. The sensor can produce an image artifact near its location, which the radiologist must consider.
Abbott also advises that glucose readings can be compromised during MRI and functionality may take up to one hour to return to normal. Use a finger-prick meter if a glucose decision is needed during that period, especially if you feel unwell. Keep the phone and reader outside the MRI room. I could not verify that the complete US MRI/CT permission is identical in the current India-supplied Libre 2 Plus product insert, so the imaging centre should check the local label before permitting continued wear.
Other important differences
- Dexcom G6: the manufacturer advises removal of the sensor and other components for both MRI and CT. Dexcom G7: no MRI; CT may be possible only if the sensor is outside the scanned area and protected with a lead apron as specified by Dexcom and the radiology team. Do not improvise shielding yourself.
- Medtronic Guardian Connect and Guardian 4: remove the sensor and transmitter for MRI and CT. If the CGM is linked to a MiniMed insulin pump, the pump also needs its own imaging and insulin-delivery plan. Removing the sensor can interrupt automated insulin adjustments.
- GlucoRx Vixxa 2 and Sinocare iCan i3: the examined manufacturer instructions call for removal before MRI and CT.
- BeatO Active: the Indian product listing identifies MicroTech Medical as manufacturer but does not provide a model-specific MRI/CT clearance. Do not assume that compatibility statements for another MicroTech or LinX device apply to a BeatO-branded unit. Ask BeatO for the exact model and written instructions.
What should I do before an MRI or CT appointment?
- Check the full sensor name on the carton or applicator label. Tell the radiology department if you also use an insulin pump or any implanted medical device.
- Ask the imaging centre to check your exact model, locally supplied instructions, scanner field strength and scan area. US guidance alone is not proof of Indian product clearance.
- If removal is required, plan for a replacement sensor because most disposable sensors cannot be reinserted. Contact the sensor provider if you need advice about replacement.
- Carry a working glucometer, test strips and supplies to treat hypoglycaemia. If you are fasting, use insulin or have impaired awareness of lows, agree on a monitoring plan before the procedure.
- Keep phones, readers, transmitters and insulin pumps outside the MRI room unless each item is explicitly authorised for that environment. Do not assume an MRI-conditional sensor makes the rest of the system MRI safe.
For urgent imaging, do not delay a medically necessary scan merely to keep a sensor in place. Tell the radiology staff immediately so safe device removal and glucose management can be arranged. If a sensor that should have been removed was exposed to an MRI or CT, inform the team, use a finger-prick meter rather than relying on the exposed sensor, and contact the manufacturer. Pain, heating or a skin injury at the site needs prompt assessment.